Want to prevent Legionella from showing up in your facility?
Kill the bacteria before it reaches any water system. Traditional oxidizing agents such as chlorine have been proven very effective in controlling Legionella. Using continuous chlorination at low free residual levels can be effective in controlling Legionella. That’s why many hospitals are using Everpure’s 4SI and 7SI cartridges on their ice machines to help prevent the Legionella bacteria from forming in their water.
Specializes in slime and bacteria growth prevention Reduces particulates down to 0.5 micron Utilizes depth filtration and Fiberdyne™ media for superior dirt holding capability Leaves chlorine and chloramines within water that is supplied to equipment which helps to reduce slime and bacteria growth in applications Reduces system maintenance, service costs and buildup. Scale and slime, as well as, bacteria growth can result in clogging of distribution lines, malfunction of probes, floats, pumps, solenoids and valves, and higher energy consumption Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination Can be used on Insurice® and Hybrid Manifold Systems NSF® Certified under NSF / ANSI Standards 42 and 53 Features: Cyst Reduction Particulate Reduction Capacity: 25,000 gallons (94,635 liters) Maximum Flow: 3.5 gpm (13.25 lpm) Qty. per Case: 0 Working Pressure: 10 – 125 psi (0.7 – 8.6 bar), non-shock Max. Temp: 35 – 100ºF (2 – 38ºC) H: 20.75″ D: 3.25″ Certifications: NSF42 NSF53 Contact us for more information on the 7SI cartridge and how to stop Legionella at 800-942-7873 or email us at info@filterpure.com
Provided the water in your area does not fall under a “Do not use”, boil water alert, your filter system and filters unless damaged by the storm should be fine. If your area does fall under a boil water alert you should change all filters and membranes installing new, unused filters or membrane cartridges after you have completely sanitized your system. Boil water alerts are often issued by water municipalities when damage occurs to water lines. These alerts can also be issued if there is a loss in water pressure, allowing bacteria to backwash into the water pipes. Minerals and viruses like E.coli, cryptosporidium, and giardia, are all things that may get into water when a pipe breaks or during a natural disaster, like flooding. Below is Everpure’s Technical Service Bulletin regarding water quality emergencies and the procedures to place your system back into operation after a boil water alert.
Everpure Technical Service Bulletin
File No: 011414
Subject: Responding to Water Quality Emergencies
RESPONDING TO WATER QUALITY EMERGENCIES
Natural disasters such as earthquakes, floods and hurricanes cause contamination of municipal water systems over a large area. Industrial and other chemical leaks can also cause contamination of water supplies. If a water quality emergency occurs in your location, follow your local municipality’s instructions for addressing the emergency. If a boil order is issued, follow that boil order advisory until you have been notified by local authorities that your water is potable and safe to use.
Following is our recommended procedure for cleaning and start-up of Pentair water treatment systems using Pentair filters and RO membranes for commercial foodservice applications.
PENTAIR® OBEYING BOIL WATER ADVISORIES:
Obey them, period!
Contamination due to breaks in the mains, general flooding, or damage to the municipal waterworks itself should not be confused with situations in which contamination by protozoan cysts (e.g. Cryptosporidium, Giardia) is discovered in a water supply. Everpure submicron filters and RO membranes are NSF-Certified for removing such cysts, but not for killing or removing dangerous bacteria and viruses, which must be assumed to be present during the aftermath of a disaster, chemical spill or other water emergency.
When a Boil Water Advisory is announced and it is clear that there has been gross contamination, operators should stop using their filtration or RO system and boil their water as advised by their local authorities, until:
The “all clear” is given by local water authorities
Plumbing systems in your facility have been disinfected
Your Pentair system has been cleaned and any old or contaminated filter or RO cartridges have been replaced with new ones CLEANUP OF PENTAIR SYSTEMS: When safe water is available again, all water-using equipment should be sanitized with an approved disinfectant such as diluted chlorine bleach (5.25% sodium hypochlorite). The recommended dosage is 100-200 mg/L chlorine, which is easy to make. Fresh bleach has about 50 mg of chlorine in each mL, or about 500 mg in a capful. Four capfuls or an ounce in a 2-1/2 gal. bucket of water makes about 200 mg/L. Add a few drops of cleaning concentrate (e.g. dish detergent) to this solution and use it to clean external surfaces. Unexposed, interior plumbing surfaces can be sanitized in place using a Pentair Everpure JT Sanitizing/Flushing Cartridge. (Contact your local distributor or sales agent to acquire the JT can). This is an empty housing which can be filled with any cleaning or sanitizing solution and then be inserted into Everpure-branded filter heads. When the flow of water resumes, the disinfectant will be fed into the lines. When a strong chlorine smell is evident at the closest outlet, the flow should be stopped and the sanitizing solution left to soak for at least 30 minutes. When sanitization is complete, remove the flushing cartridge and install new, unused filters or membrane cartridges. Rinse the equipment by flushing water through the system as directed in your system’s Installation and Operation manual. Return your filtration or RO system to service. POST-EMERGENCY SYSTEM OPERATION: Follow the replacement cartridge change-out schedule per your system’s specifications. We suggest that you continue to monitor and follow your local water authority’s post-emergency recommendations. Please note that water problems caused by natural disasters often include high turbidity, even muddy, conditions. As a result, filter cartridges may clog faster and need replacing sooner than usual. If you have any questions regarding these instructions or require additional assistance please call us at 1-800-942-7873 or email us at info@filterpure.com
Worried about lead in your drinking water? Dealing with contaminated water is something Filter Pure Systems and Pentair/Everpure have always been prepared for. Our products are designed to make water drinkable and safe to use for your kitchen equipment. On January 19th, 2016 the WQA , Water Quality Association Addressed the Drinking Water Crisis in Flint, Michigan offering facts and tips about treating for lead contamination and noted that ; “Lead (Pb) has been identified as the waterborne contaminant of primary concern for Flint’s residents. To minimize the presence of contaminants such as lead, which may enter the water after it has left a municipal treatment facility, WQA recommends water treatment equipment that has been certified by an ANSI (American National Standards Institute)-accredited certification body. Such accredited entities include WQA’s Gold Seal Product Certification Program and the National Sanitation Foundation. With exclusive filtration technology, high-flow performance, and the durability of aluminum and stainless steel, Pentair Everpure delivers clean, clear water that tastes great and protects your home and appliances. Certified by NSF to remove lead, off- tastes and odors. Certified NSF/ANSI to standards 53 or 58 to reduce cysts such as cryptosporidium and Giardia by mechanical means. From the H-300 to the new H300-NXT with the ability to remove even pharmaceuticals from your drinking water, we have your solution. For more details use this link to download the catalog now, Everpure-Catalog-_2019 or email us at info@filterpure.com and we will get a copy emailed over to you directly. Any questions call us at 800-942-7873.
In collaboration with The Weather Channel Forecast: Change campaign to raise awareness about the issue of global clean water scarcity, IBM will contribute a total market value of $1 million to charity: water and The Nature Conservancy to help provide and protect clean water for those in need.
Nitrate pollution of U.S. drinking water may cause up to 12,594 cases of cancer a year, according to a new peer-reviewed study by the Environmental Working Group. For the groundbreaking study, published today in the journal Environmental Research, EWG scientists estimated the number of cancer cases in each state that could be attributed to nitrate contamination of public water systems, largely caused by farm runoff containing fertilizer and manure. They also estimated the costs of treating those cases at up to $1.5 billion a year.
Worried about pesticides showing up in your water? We can help! Just email us at info@filterpure.com or call us at 800-942-7873 to find out how to remove nitrates from your water.
Dad’s wellness and happiness begins with water! Unfortunately, the body’s mechanisms meant to protect us from dehydration work less well as we age. Utilizing the same technologies used around the world in restaurants and coffee houses, Pentair Everpure has made superior filtration available for the home and pristine water available for Dad on demand! Everpure commercial grade water filtration systems reduce contaminants that affect water taste while preserving the valuable minerals and vitamins naturally found in drinking water. Not sure what system would work best for your Dad’s water? You can start by taking a look at your local municipality’s water quality report to see what you are dealing with, then take a look at the filter selection guide for contaminants located on page 4 of the Everpure Designer catalog!
With exclusive filtration technology, high-flow performance, and the durability of aluminum and stainless steel, Pentair Everpure delivers clean, clear water that tastes great and protects Dad’s home and appliances. Certified by NSF to remove lead, off- tastes and odors. Certified NSF/ANSI to standards 53 or 58 to reduce cysts such as cryptosporidium and Giardia by mechanical means. From the H-300 to the new H300-NXT with the ability to remove even pharmaceuticals from Dad’s water, we have your solution. For more details use this link to download the catalog now, Everpure-Catalog-_2019 or email us at info@filterpure.com and we will get a copy emailed over to you directly. Any questions call us at 800-942-7873.
Looking to take your drinking water to the next level;
The New 2019 Everpure Home Catalog is now available in download or hard copy. From solution to selection by contaminants, this catalog can hep you size the correct solution for the specific problems in you water.
From the H-300 to the new H300-NXT with the ability to remove pharmaceuticals from your water, we have your solution. Download the catalog now or if you would like a hard copy mailed to you by USPS please call us directly at 800-942-7873 or email us at info@filterpure.com and we will get a copy out to you directly.
The Smart, Proactive Choice to Protect Foodservice Equipment.
This system provides a continuous flow of conditioned water by utilizing dual sensor technology, even with variations in hardness in the water supply. Plus, twin tanks ensure the operation has soft water, protecting water-using equipment 24/7.
Remote monitoring technology makes the Everpure CES-9100TS E-30C even more powerful when paired with the new Conserv HE-3 Reverse Osmosis system. Two great systems that are truly better together!
BENEFITS; The Pentair Everpure CES-9100TS E-30C increases operational efficiency with: Proactive protection for valuable equipment investments, reducing downtime. Continuous supply of soft water, 24/7Ease of programming – just set the hardness level and the valve does the rest. Twin sensors that help save water and energy, making adjustments for incoming water conditions, and allowing full utilization of resin bed before regeneration. Alerts indicating system is unplugged or salt is low when paired with the Pentair Everpure Conserv HE-3 Reverse Osmosis System.
This 2019 Commercial Ice Machine season is shaping up to be a record breaker! The majority of ice for consumption and refrigeration is purchased in the summer, nearly 80 percent between Memorial Day and Labor, according to the International Packaged Ice Association. According to AAA / IHS forecast more than 41 million travelers will hit the road this upcoming Memorial Day holiday period, an increase of approximately 6.8 percent over 2018. Another record breaking year! Last year, the highest pump prices for gasoline came just ahead of the Memorial Day holiday weekend. The national average price reached $2.98 a gallon, but it didn’t hit that level again all year and by December had dropped to $2.26 a gallon, the lowest average of the year. The average price of gasoline as of today May 14th, 2019 is $2.85 per gallon and expectations are for prices to fall into the holiday. Temperatures in the southeast are already kicking up into the 90s so you can expect record demand from thirsty tourists this year and commercial ice machine/s to be working overtime to keep up as the season kicks in! So there is no better time than now to make sure that your Ice Machine is ready for the season and Everpure Ice Machine water filters are ready to help. Now is the best time to check your system and order replacement water filters if you need them. These filters are critical in making sure your machine not only produces the freshest, cleanest tasting ice, but also so that it runs efficiently and doesn’t use more energy than necessary. With record temperatures expected this year, you can expect your machine to be working overtime and Everpure Ice Machine water filters are ready help, and this year’s 2019 lineup includes;
Protect your Ice machines superior performance, NSF Certification and Warranty. For more information on perfecting your ice please call us at 800-942-7873!
As the most popular holiday of the year to dine out, Mother’s Day will entice nearly half of Americans to dine out or order restaurant takeout or delivery on this Sunday, May 12th. According to the NRF, National Retail Federation, this 2019 Mother’s Day will be the biggest one yet as consumers spend a record $25 billion, up from $23.1 billion in 2018. Whether consumers pick mom’s preferred buffet breakfast or her favorite fine-dining dinner, America’s restaurants are stepping up to the plate to help families celebrate the special occasion. And while a majority of consumers make their Mother’s Day meal plans less than a month out, nearly one in five have probably been planning their celebratory meals for more than one month and the first thing that Mom is going to taste is the water! With everything that’s been happening in the news lately regarding drinking water, make sure that your Restaurant’s table water is ready to make a great first impression also. You can be sure that if your water is off color with a bad taste or odor this weekend, it is going to reflect poorly on the person who recommended your restaurant for Mom.
Either way it is certainly something that is easy to avoid, as easy as making sure that your water filters have been changed or if you don’t already have one, installing an Everpure water filtration system to take care of all of the beverages and ice that you are serving. If you already have an Everpure system, it is essential that filters be replaced periodically. The frequency of filter changes depends upon your water quality and your water usage. For example, if there is a lot of sediment and/or particles in your water, then you will have to change your filters more frequently than a location with little to no sediment. Be sure to replace your filters whenever you notice a decline in the performance, whether it is a drop in flow rate and/or pressure or an unusual taste in the water.
Prefilter, ( First bowl to left, system above)
The prefilter (coarse) cartridge should be changed when it becomes dirty to within 1/8″ of the core or when you see the outlet pressure gauge fall into the red zone. Check the pressure gauge only when the equipment is calling for water.
Submicron Cartridges ( 3 in the middle system pictured above)
The cartridges should be changed at the first occurrence of a) the gallon rating stated on the label, b) every 6 months, or c) the pressure gauge needle falls into the red zone while your equipment is calling for water.
Scalestick ( cartridge in last bowl to right pictured in system above)
The Scalestick needs to be replaced before the Hydroblend compound is completely used up.
You should also replace your water filters whenever you notice a decline in performance, whether it is a drop in flow rate and/or pressure, or an unusual taste in the water. You should also, per the CDC, replace your water filter after any boil water advisory alert is lifted in your area. Remember: taste and odor may tip you off to the presence of chlorine in your water, but most contaminants are tasteless and odorless.
For the benefit of our customers, we have set-up automatic electronic reminders that are sent when we see that their filters are due to be replaced, based on order history. We can even set-up Auto-Ship for customers that know they will need water filters by a certain date, but may not remember to place an order.
If you have a question regarding how often you should replace your filter or not sure about the filter system that you have please email your questions and a picture of the system to info@filterpure.com or call our team at 1-800-942-7873 and have a very Happy Mother’s Day!
