Search Results for: reverse osmosis

Everpure MR-100 EV9627-11 Reverse Osmosis Filter Cartridge

Everpure MR-100 EV9627-11 Reverse Osmosis Filter Cartridge features:

  • Part Number: EV9627-11 
  • Capacity: 100 Gallons per Day nominal 
  • Overall Dimensions: 17.00”H x 3.25”D 
  • Daily Production Rate: 100 GPD (1,325 lpd) Nominal
    • Water pressure, feedwater quality and temperature will effect actual daily production rate 
  • Service Flow Rate: Dependant on water volume and pressure in storage tank(s), and line size(s) to equipment 
  • Mineral Reduction Cartridge for High TDS Waters 
  • Pressure Requirements: 40 – 100 psi (276-689 kPa), non-shock 
  • Ideal for:
    • Coffee/espresso machines 
    • Reconstitution 
    • Ice 
    • Flash steamers 
    • Conventional steamers 
    • Combiovens 
  • Proper pre-treatment is required to control MR Cartridge (membrane) scale formation and/or fouling
    • Raw water hardness in excess of 7 grains per gallon should be softened to extend cartridge life 
    • The raw water may contain chlorine or other oxidizers and the use of a carbon pre-filter is recommended

Improves equipment life and performance by removing at least 90%+ of all dissolved solids using Reverse Osmosis Separation Technology. A reduction in Total Dissolved Solids (TDS) makes the water less likely to impart undesirable tastes in beverages, sauces, soups and other food products. Especially useful on steamers, warmers, steam boilers and other evaporative equipment that are not emptied each day. Heating surfaces maintain peak heat transfer efficiency, reducing cycle times and energy consumption. Limits limescale build-up, which can cause excessive machine downtime and maintenance costs. Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination.


Contact FilterPure at 1-800-942-7873 for more information on this product.


Download the Everpure MR-100 EV9627-11 Reverse Osmosis Filter Cartridge Specification Sheet

Everpure MR-600 EV9627-23 Reverse Osmosis Filter Cartridge

Everpure MR-600 EV9627-23 Reverse Osmosis Filter Cartridge features:

  • Old Part Number:  EV9627-13 
  • Capacity: 600 Gallons per Day nominal 
  • Overall Dimensions: 25.00”H x 3.25”D 
  • Daily Production Rate: 600 GPD (1,325 lpd) Nominal
    • Water pressure, feedwater quality and temperature will effect actual daily production rate 
  • Service Flow Rate: Dependant on water volume and pressure in storage tank(s), and line size(s) to equipment 
  • Mineral Reduction Cartridge for High TDS Waters 
  • Pressure Requirements: 40 – 100 psi (276-689 kPa), non-shock 
  • Ideal for:
    • Coffee/espresso machines 
    • Reconstitution 
    • Ice 
    • Flash steamers 
    • Conventional steamers 
    • Combiovens 
  • Proper pre-treatment is required to control MR Cartridge (membrane) scale formation and/or fouling
    • Raw water hardness in excess of 7 grains per gallon should be softened to extend cartridge life 
    • The raw water may contain chlorine or other oxidizers and the use of a carbon pre-filter is recommended

Improves equipment life and performance by removing at least 90%+ of all dissolved solids using Reverse Osmosis Separation Technology. A reduction in Total Dissolved Solids (TDS) makes the water less likely to impart undesirable tastes in beverages, sauces, soups and other food products. Especially useful on steamers, warmers, steam boilers and other evaporative equipment that are not emptied each day. Heating surfaces maintain peak heat transfer efficiency, reducing cycle times and energy consumption. Limits limescale build-up, which can cause excessive machine downtime and maintenance costs. Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination.


Have questions about this product? Contact FilterPure at 1-800-942-7873.


Download the Everpure MR-600 EV9627-13 Reverse Osmosis Filter Cartridge Specification Sheet

Everpure 7TO-BW EV9627-04 Reverse Osmosis Filter Cartridge

Everpure 7TO-BW EV9627-04 Reverse Osmosis Filter Cartridge includes:

  • Part Number: EV9627-04
  • Overall Dimensions: 20.75”H x 3.25”D
  • Service Flow Rate: Maximum 1.5 gpm (5.74 Lpm)
  • Rated Capacity: 30,000 gallons
  • Pressure Requirements: 10 – 125 psi (0.7 – 8.6 bar), non-shock
  • Prefilter for RO membranes which are sensitive to chlorine
  • Taste and odor filter for extremely turbid water
  • Granular activated carbon reduces chlorine taste and odor and other unwanted contaminants
  • Effectively reduces chloramines from water

Prefilter for RO membranes which are sensitive to chlorine. Taste and odor filter for extremely turbid water. Granular activated carbon reduces chlorine taste and odor and other unwanted contaminants. Effectively reduces chloramines from water.

Contact FilterPure at 1-800-942-7873 for more information on this product.


Download the Everpure 7TO-BW EV9627-04 Reverse Osmosis Filter Cartridge Specification Sheet

Everpure MR-350 EV9627-07 Reverse Osmosis Filter Cartridge

Everpure MR-350 EV9627-07 Reverse Osmosis Filter Cartridge features include:

  • Part Number: EV9627-07 
  • Capacity: 350 Gallons per Day nominal 
  • Overall Dimensions: 25.00”H x 3.25”D 
  • Daily Production Rate: 350 GPD (1,325 lpd) Nominal
    • Water pressure, feedwater quality and temperature will effect actual daily production rate 
  • Service Flow Rate: Dependant on water volume and pressure in storage tank(s), and line size(s) to equipment 
  • Mineral Reduction Cartridge for High TDS Waters 
  • Pressure Requirements: 40 – 100 psi (276-689 kPa), non-shock 
  • Ideal for:
    • Coffee/espresso machines 
    • Reconstitution 
    • Ice 
    • Flash steamers 
    • Conventional steamers 
    • Combiovens 
  • Proper pre-treatment is required to control MR Cartridge (membrane) scale formation and/or fouling
    • Raw water hardness in excess of 7 grains per gallon should be softened to extend cartridge life 
    • The raw water may contain chlorine or other oxidizers and the use of a carbon pre-filter is recommended

Improves equipment life and performance by removing at least 90%+ of all dissolved solids using Reverse Osmosis Separation Technology. A reduction in Total Dissolved Solids (TDS) makes the water less likely to impart undesirable tastes in beverages, sauces, soups and other food products. Especially useful on steamers, warmers, steam boilers and other evaporative equipment that are not emptied each day. Heating surfaces maintain peak heat transfer efficiency, reducing cycle times and energy consumption. Limits limescale build-up, which can cause excessive machine downtime and maintenance costs. Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination.


Contact FilterPure at 1-800-942-7873 for additional product information.


Download the Everpure MR-350 EV9627-07 Reverse Osmosis Filter Cartridge Specification Sheet

Everpure MR-225 EV9627-03 Reverse Osmosis Cartridge

Everpure MR-225 EV9627-03 Reverse Osmosis Cartridge features:

  • Part Number: EV9627-03
  • Capacity: 225 Gallons per Day nominal
  • Overall Dimensions: 17.00”H x 3.25”D
  • Daily Production Rate: 225 GPD (852 lpd) Nominal
    • Water pressure, feedwater quality and temperature will effect actual daily production rate
  • Service Flow Rate: Dependant on water volume and pressure in storage tank(s), and line size(s) to equipment
  • Mineral Reduction Cartridge for High TDS Waters
  • Pressure Requirements: 40 – 100 psi (276-689 kPa), non-shock
  • Ideal for:
    • Coffee/espresso machines
    • Reconstitution
    • Ice
    • Flash steamers
    • Conventional steamers
    • Combiovens
  • Proper pre-treatment is required to control MR Cartridge (membrane) scale formation and/or fouling
    • Raw water hardness in excess of 7 grains per gallon should be softened to extend cartridge life
    • The raw water may contain chlorine or other oxidizers and the use of a carbon pre-filter is recommended


Improves equipment life and performance by removing at least 90%+ of all dissolved solids using Reverse Osmosis Separation Technology. A reduction in Total Dissolved Solids (TDS) makes the water less likely to impart undesirable tastes in beverages, sauces, soups and other food products. Especially useful on steamers, warmers, steam boilers and other evaporative equipment that are not emptied each day. Heating surfaces maintain peak heat transfer efficiency, reducing cycle times and energy consumption. Limits limescale build-up, which can cause excessive machine downtime and maintenance costs. Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination.

Download the Everpure MR-225 EV9627-03 Reverse Osmosis Cartridge Specification Sheet

Everpure EV9970-76 MRS-225BL Blended Reverse Osmosis System

Features of the Everpure EV9970-76 MRS-225BL Blended Reverse Osmosis System:

  • Mineral Reduction System generating 225 gallons per day. 
  • The BL Series features an adjustable blend valve, which allows custom tailoring of the dissolved mineral content in the treated water. 
  • This feature allows a controlled amount of raw water to be mixed with the Reverse Osmosis water to create a blend containing the desired level of TDS (Total Dissolved Solids). 
  • After blending, the water passes through a sub-micron carbon filter. This final filtration step removes tastes and odors, and insures delivery of ingredient quality water. 
  • “CC” models introduce a small amount of hardness minerals back into the treated water. 
  • Improves equipment life and performance by removing at least 90%+ of all dissolved solids that cause scale build-up.
  • Guards against taste and odor causing contaminants while removing dirt, particulates and dissolved minerals that can adversely affect taste of water and beverages. 


Specifications:

  • Overall Dimensions Inches : 38″ H x 15″ W x 8″ D. 
  • Overall Demensions Centimeters (CM): 96.5H X 38.1W X 20.3 D. Voltages:115VAC/60Hz (NEMA 5-15P Plug). 230VAC/50Hz (CEE 7/7 Plug). 240VAC/50Hz (AS 3112 Plug). 
  • Inlet and outlet connection: 3/8″ OD tube connection. 
  • Wastewater line connection: 1/4″ OD tube connection. 
  • Service Flow Rate: Dependant on water pressure in storage tank and line size(s) to equipment. 




Pressure Requirements: 

  • Operating: 25 – 80 psi (172-552 kPa), non-shock. 
  • Maximum Static: 100 psi (689 kPa), non-shock. 
  • Water Supply: 0.7 gpm (2.7 lpm). Inlet Temperature: 40F – 100F (4-38C). Inlet TDS: 1,500 ppm max recommended. 
  • Operating Weight: 35 lbs. (15.9 kg.)(not including storage tanks). 
  • REQUIRES STORAGE TANK – Everpure offers a complete line of storage tanks.

For more information on this product, contact FilterPure at 1-800-942-7873.


Download the Everpure EV9970-76 MRS-225BL Blended Reverse Osmosis System Specification Sheet

Everpure MRS-600HE-II EV9970-54 Reverse Osmosis System

Features of the Everpure MRS-600HE-II EV9970-54 Reverse Osmosis System include:

The tailored blending process removes just the right amount of dissolved solids from the incoming tap water to achieve the desired final water quality. High recovery reverse osmosis technology yields significant savings in water and sewer charges with a minimal environmental footprint. With the average recovery of 78%, the MRS-600HE system only disposes approximately 1/4 cup of water for each cup of water dispensed.

Mineral Reduction System for foodservice applications including coffee brewers, espresso machines, steamers, combi ovens, and ice – ideal for specialty coffee.

  • Requires less than 50% of the electrical energy typically consumed by conventional reverse osmosis systems
  • On board storage tank provides ample reserve capacity for most applications
  • For increased reserve capacity, Everpure offers a complete line of storage tanks
  • Reduces limescale build-up that can cause excessive machine downtime and increased maintenance costs
  • Reduces chlorine taste and odor and other contaminants that can adversely affect the taste of water and beverages

Specifications:

  • Overall Dimensions: 32″ H x 23″ W x 13.6″ D 813 mm H x 584 mm W x 345 mm D [Add 3″ (76 mm) on all 4 sides for cover removal and service access]
  • Inlet and outlet connection: 3/8″ (9.5 mm) OD tube connection
  • Wastewater line connection: 3/8″ (9.5 mm) OD tube connection
  • Daily Production Rate:
    • Processor Only (no blend):
      • 600 gpd (2,271 lpd) nominal
      • 0.417 gpm (1.58 lpm) nominal
    • Processor with Blend:
      • 600 gpd (2,271 lpd) nominal
      • (plus tap water addition)
  • Total daily production rate will vary based on tap water TDS, RO percent rejection and desired blend water TDS – Contact Filterpure for assistance estimating this total
  • Service Flow Rate: Dependant on water pressure in storage tank and line size(s) to equipment
  • Pressure Requirements:
    • Operating: 25 – 80 psi (1.72-5.52 bar), non-shock
    • [Pressure below 50 psi (3.45 bar) may affect blend system performance]
    • Maximum Static: 100 psi (6.89 bar), non-shock
  • Available Voltages and Power Cord Types
    • 115VAC/60Hz – NEMA 5-15P Plug
    • 220VAC/50Hz – GB 2099 Plug
    • 230VAC/50Hz – “Schuko” CEE 7/7 Plug
    • 240VAC/50Hz – AS 3112 Plug
  • Minimum Water Supply: 1.5 gpm (5.7 lpm)
  • Inlet Temperature: 40–100°F (4–38°C)
  • Inlet TDS: 1000 ppm max. recommended

Replacement cartridges:

  • 1 x MR-600 EV9617-13
  • 2 x MC2 EV9612-56
  • 3 x 7FS-BW EV9627-16

Operation Tips

  • Change filter cartridges on a regular 6-month preventative maintenance program
  • Change RO cartridges on a regular 2-year preventative maintenance program
  • Change cartridges when capacity is reached
  • Always flush the filter cartridge at time of installation and cartridge change
  • Proper pre-treatment is required to control RO Cartridge (membrane) scale formation and/or fouling
    • Raw water hardness in excess of 7 grains per gallon should be softened
    • The raw water may contain particulates and the use of a pre-filter is recommended
  • Contact EVERPURE Technical Service for pre-treatment recommendations

Installation Tips

  • Choose a mounting location suitable to support the full weight of the system when operating
  • Deliming of equipment prior to application is recommended
  • Never use saddle valve for connection 
  • Use 3/8” (10 mm) water line
  • The water inlet must supply a minimum of 0.7 gpm (2.7 lpm)
  • Install vertically with cartridge hanging down and allow 2 inches above and below unit for cover removal and service access
  • Allow clearance to right of unit for optional prefilter
  • Refer to Installation, Operation & Maintenance Manual for cartridge flushing and RO start-up

Contact FilterPure for additional product information at 1-800-942-7873.
Download the Everpure MRS-600HE-II EV9970-54 Reverse Osmosis System Specification Sheet

Everpure EV9970-73 MRS-100BL Blended Reverse Osmosis System

The Everpure EV9970-73 MRS-100BL Blended Reverse Osmosis System features:

  • Mineral Reduction System generating 100 gallons per day. 
  • The BL Series features an adjustable blend valve, which allows custom tailoring of the dissolved mineral content in the treated water. 
  • This feature allows a controlled amount of raw water to be mixed with the Reverse Osmosis water to create a blend containing the desired level of TDS (Total Dissolved Solids). After blending, the water passes through a sub-micron carbon filter. This final filtration step removes tastes and odors, and insures delivery of ingredient quality water. “CC” models introduce a small amount of hardness minerals back into the treated water. Improves equipment life and performance by removing at least 90%+ of all dissolved solids that cause scale build-up.
  • Guards against taste and odor causing contaminants while removing dirt, particulates and dissolved minerals that can adversely affect taste of water and beverages. 


Specifications: 

  • Overall Dimensions Inches : 38″ H x 15″ W x 8″ D. Overall Demensions Centimeters (CM): 96.5H X 38.1W X 20.3 D. Voltages:115VAC/60Hz (NEMA 5-15P Plug). 230VAC/50Hz (CEE 7/7 Plug). 240VAC/50Hz (AS 3112 Plug). 
  • Inlet and outlet connection: 3/8″ OD tube connection. 
  • Wastewater line connection: 1/4″ OD tube connection. 
  • Service Flow Rate: Dependant on water pressure in storage tank and line size(s) to equipment. 


Pressure Requirements: 

  • Operating: 25 – 80 psi (172-552 kPa), non-shock. Maximum Static: 100 psi (689 kPa), non-shock. 
  • Water Supply: 0.7 gpm (2.7 lpm). 
  • Inlet Temperature: 40F – 100F (4-38C). 
  • Inlet TDS: 1,500 ppm max recommended. 
  • Operating Weight: 35 lbs. (15.9 kg.)(not including storage tanks). 
  • REQUIRES STORAGE TANK – Everpure offers a complete line of storage tanks.

For more information on this product, contact FilterPure at 1-800-942-7873.


Download the Everpure EV997073 MRS-100BL Blended Reverse Osmosis System Specification Sheet

Everpure MRS-600HE EV9970-38 Reverse Osmosis System

Features of the Everpure MRS-600HE EV9970-38 Reverse Osmosis System:

The tailored blending process removes just the right amount of dissolved solids from the incoming tap water to achieve the desired final water quality. High recovery reverse osmosis technology yields significant savings in water and sewer charges with a minimal environmental footprint. With the average recovery of 78%, the MRS-600HE system only disposes approximately 1/4 cup of water for each cup of water dispensed.

Mineral Reduction System for foodservice applications including coffee brewers, espresso machines, steamers, combi ovens, and ice – ideal for specialty coffee.

  • Requires less than 50% of the electrical energy typically consumed by conventional reverse osmosis systems
  • On board storage tank provides ample reserve capacity for most applications
  • For increased reserve capacity, Everpure offers a complete line of storage tanks
  • Reduces limescale build-up that can cause excessive machine downtime and increased maintenance costs
  • Reduces chlorine taste and odor and other contaminants that can adversely affect the taste of water and beverages

Specifications:

  • Overall Dimensions: 32″ H x 23″ W x 13.6″ D 813 mm H x 584 mm W x 345 mm D [Add 3″ (76 mm) on all 4 sides for cover removal and service access]
  • Inlet and outlet connection: 3/8″ (9.5 mm) OD tube connection
  • Wastewater line connection: 3/8″ (9.5 mm) OD tube connection
  • Daily Production Rate:
    • Processor Only (no blend):
      • 600 gpd (2,271 lpd) nominal
      • 0.417 gpm (1.58 lpm) nominal
    • Processor with Blend:
      • 600 gpd (2,271 lpd) nominal
      • (plus tap water addition)
  • Total daily production rate will vary based on tap water TDS, RO percent rejection and desired blend water TDS – Contact Filterpure for assistance estimating this total
  • Service Flow Rate: Dependant on water pressure in storage tank and line size(s) to equipment
  • Pressure Requirements:
    • Operating: 25 – 80 psi (1.72-5.52 bar), non-shock
    • [Pressure below 50 psi (3.45 bar) may affect blend system performance]
    • Maximum Static: 100 psi (6.89 bar), non-shock
  • Available Voltages and Power Cord Types
    • 115VAC/60Hz – NEMA 5-15P Plug
    • 220VAC/50Hz – GB 2099 Plug
    • 230VAC/50Hz – “Schuko” CEE 7/7 Plug
    • 240VAC/50Hz – AS 3112 Plug
  • Minimum Water Supply: 1.5 gpm (5.7 lpm)
  • Inlet Temperature: 40–100°F (4–38°C)
  • Inlet TDS: 1000 ppm max. recommended

Operation Tips

  • Change filter cartridges on a regular 6-month preventative maintenance program
  • Change RO cartridges on a regular 2-year preventative maintenance program
  • Change cartridges when capacity is reached
  • Always flush the filter cartridge at time of installation and cartridge change
  • Proper pre-treatment is required to control RO Cartridge (membrane) scale formation and/or fouling
    • Raw water hardness in excess of 7 grains per gallon should be softened
    • The raw water may contain particulates and the use of a pre-filter is recommended
  • Contact FILTERPURE Technical Service for pre-treatment recommendations

Installation Tips

  • Choose a mounting location suitable to support the full weight of the system when operating
  • Deliming of equipment prior to application is recommended
  • Never use saddle valve for connection 
  • Use 3/8” (10 mm) water line
  • The water inlet must supply a minimum of 0.7 gpm (2.7 lpm)
  • Install vertically with cartridge hanging down and allow 2 inches above and below unit for cover removal and service access
  • Allow clearance to right of unit for optional prefilter
  • Refer to Installation, Operation & Maintenance Manual for cartridge flushing and RO start-up

**Pallet Shipment Only**


For additional product information, please contact FilterPure at 1-800-942-7873.
Download the Everpure MRS-600HE EV9970-38 Reverse Osmosis System Specification Sheet

Everpure MRS-350 EV9970-17 Reverse Osmosis System

The Everpure MRS-350 EV9970-17 Reverse Osmosis System includes:

  • Part Number: EV9970-17 
  • Improves equipment life and performance by removing at least 90%+ of all dissolved solids that cause scale build-up 
  • Guards against taste and odor causing contaminants while removing dirt, particulates and dissolved minerals that can adversely affect taste of water and beverages 
  • Wall mount design allows flexible installation 
  • Reduces limescale build-up that can cause excessive machine downtime and increased maintenance costs 
  • Scale reduction reduces energy costs 
  • “CC” models introduce a small amount of hardness minerals back into the treated water 
  • This controlled re-mineralization is desirable for coffee and other applications that require some hardness to achieve optimum results 
  • Specifications:
    • Overall Dimensions: 30” H (34” H – CC Model) x 15” W (20.5” Wwith Prefilter) x 8“ D 762 mm H (864mm H – CC Model) x 381 mm W (521 mm W with Prefilter) x 203 mm D 
    • Voltages:
      • 115VAC/60Hz (NEMA 5-15P Plug) 
      • 230VAC/50Hz (“Schuko” CEE 7/7 Plug) 
      • 240VAC/50Hz (AS 3112 Plug) 
    • Inlet and outlet connection: 3/8″ OD tube connection 
    • Wastewater line connection: 1/4″ OD tube connection 
    • Service Flow Rate: Dependant on water pressure in storage tankand line size(s) to equipment 
    • Pressure Requirements:
      • Operating: 25 – 80 psi (172-552 kPa), non-shock 
      • Maximum Static: 100 psi (689 kPa), non-shock 
      • Water Supply: 0.7 gpm (2.7 lpm) 
    • Inlet Temperature: 40°F – 100°F (4-38°C) 
    • Inlet TDS: 1,500 ppm max recommended 
    • Operating Weight: 35 lbs. (15.9 kg.)(not including storage tanks)

Operation Tips

  • Change filter cartridges on a regular 6-month preventative maintenance program
  • Change RO cartridges on a regular 2-year preventative maintenance program
  • Change cartridges when capacity is reached
  • Always flush the filter cartridge at time of installation and cartridge change
  • Proper pre-treatment is required to control RO Cartridge (membrane) scale formation and/or fouling
    • Raw water hardness in excess of 7 grains per gallon should be softened
    • The raw water may contain particulates and the use of a pre-filter is recommended
  • Contact EVERPURE Technical Service for pre-treatment recommendations

Installation Tips

  • Choose a mounting location suitable to support the full weight of the system when operating
  • Deliming of equipment prior to application is recommended
  • Never use saddle valve for connection 
  • Use 3/8” (10 mm) water line
  • The water inlet must supply a minimum of 0.7 gpm (2.7 lpm)
  • Install vertically with cartridge hanging down and allow 2 inches above and below unit for cover removal and service access
  • Allow clearance to right of unit for optional prefilter
  • Refer to Installation, Operation & Maintenance Manual for cartridge flushing and RO start-up

Contact FilterPure at 1-800-942-7873 for additional product information.

Download the Everpure MRS-350 EV9970-17 Reverse Osmosis System Specification System