Everpure MRS-600HE EV9970-38 Reverse Osmosis System

Description

Features of the Everpure MRS-600HE EV9970-38 Reverse Osmosis System:

The tailored blending process removes just the right amount of dissolved solids from the incoming tap water to achieve the desired final water quality. High recovery reverse osmosis technology yields significant savings in water and sewer charges with a minimal environmental footprint. With the average recovery of 78%, the MRS-600HE system only disposes approximately 1/4 cup of water for each cup of water dispensed.

Mineral Reduction System for foodservice applications including coffee brewers, espresso machines, steamers, combi ovens, and ice – ideal for specialty coffee.

• Requires less than 50% of the electrical energy typically consumed by conventional reverse osmosis systems
• On board storage tank provides ample reserve capacity for most applications
• For increased reserve capacity, Everpure offers a complete line of storage tanks
• Reduces limescale build-up that can cause excessive machine downtime and increased maintenance costs
• Reduces chlorine taste and odor and other contaminants that can adversely affect the taste of water and beverages

Specifications:

• Overall Dimensions: 32″ H x 23″ W x 13.6″ D 813 mm H x 584 mm W x 345 mm D [Add 3″ (76 mm) on all 4 sides for cover removal and service access]
• Inlet and outlet connection: 3/8″ (9.5 mm) OD tube connection
• Wastewater line connection: 3/8″ (9.5 mm) OD tube connection
• Daily Production Rate:
• Processor Only (no blend):
• 600 gpd (2,271 lpd) nominal
• 0.417 gpm (1.58 lpm) nominal
• Processor with Blend:
• 600 gpd (2,271 lpd) nominal
• (plus tap water addition)
• Total daily production rate will vary based on tap water TDS, RO percent rejection and desired blend water TDS – Contact Filterpure for assistance estimating this total
• Service Flow Rate: Dependant on water pressure in storage tank and line size(s) to equipment
• Pressure Requirements:
• Operating: 25 – 80 psi (1.72-5.52 bar), non-shock
• [Pressure below 50 psi (3.45 bar) may affect blend system performance]
• Maximum Static: 100 psi (6.89 bar), non-shock
• Available Voltages and Power Cord Types
• 115VAC/60Hz – NEMA 5-15P Plug
• 220VAC/50Hz – GB 2099 Plug
• 230VAC/50Hz – “Schuko” CEE 7/7 Plug
• 240VAC/50Hz – AS 3112 Plug
• Minimum Water Supply: 1.5 gpm (5.7 lpm)
• Inlet Temperature: 40–100°F (4–38°C)
• Inlet TDS: 1000 ppm max. recommended

Operation Tips

• Change filter cartridges on a regular 6-month preventative maintenance program
• Change RO cartridges on a regular 2-year preventative maintenance program
• Change cartridges when capacity is reached
• Always flush the filter cartridge at time of installation and cartridge change
• Proper pre-treatment is required to control RO Cartridge (membrane) scale formation and/or fouling
• Raw water hardness in excess of 7 grains per gallon should be softened
• The raw water may contain particulates and the use of a pre-filter is recommended
• Contact FILTERPURE Technical Service for pre-treatment recommendations

Installation Tips

• Choose a mounting location suitable to support the full weight of the system when operating
• Deliming of equipment prior to application is recommended
• Never use saddle valve for connection 
• Use 3/8” (10 mm) water line
• The water inlet must supply a minimum of 0.7 gpm (2.7 lpm)
• Install vertically with cartridge hanging down and allow 2 inches above and below unit for cover removal and service access
• Allow clearance to right of unit for optional prefilter
• Refer to Installation, Operation & Maintenance Manual for cartridge flushing and RO start-up

**Pallet Shipment Only**


For additional product information, please contact FilterPure at 1-800-942-7873.
Download the Everpure MRS-600HE EV9970-38 Reverse Osmosis System Specification Sheet