The second most popular holiday for dining out after Mother’s Day is Valentine’s Day and this year is expected to be exceptionally busy. According to the National Restaurant Association’s latest research, about one-quarter of Americans dine out on Valentine’s Day, that’s about 90,000,000. According to the National Retail Federation, 2016 will set a record for spending contributing $19.7 billion to the economy up from a record $18.9 billion in 2015. Keep in mind that younger people who are still trying to impress potential mates are the largest participants. Nearly two-thirds of those between 25 and 34 will celebrate the holiday, and 60% of those between 18 and 24. With everything that’s been happening in the news lately regarding drinking water, make sure that your Restaurant’s table water is ready to make a great first impression also. You can be sure that if your water is off color with a bad taste or odor this weekend, it’s not only going to reflect poorly on the person who recommended your restaurant as the beginning of a new romance, but may have the saving grace of being a great conversation starter comparing your water to that of Flint Michigan’s water if they stick around to eat. Either way it is certainly something that is easy to avoid, as easy as making sure that your water filters have been changed or if you don’t already have one, installing an Everpure water filtration system to take care of all of the beverages and ice that you are serving. If you already have an Everpure system, it is essential that filters be replaced periodically. The frequency of filter changes depends upon your water quality and your water usage. For example, if there is a lot of sediment and/or particles in your water, then you will have to change your filters more frequently than a location with little to no sediment. Be sure to replace your filters whenever you notice a decline in the performance, whether it is a drop in flow rate and/or pressure or an unusual taste in the water.
Prefilter, ( First bowl to left, system above)
The prefilter (coarse) cartridge should be changed when it becomes dirty to within 1/8″ of the core or when you see the outlet pressure gauge fall into the red zone. Check the pressure gauge only when the equipment is calling for water.
Submicron Cartridges ( 3 in the middle system pictured above)
The cartridges should be changed at the first occurrence of a) the gallon rating stated on the label, b) every 6 months, or c) the pressure gauge needle falls into the red zone while your equipment is calling for water.
Scalestick ( cartridge in last bowl to right pictured in system above)
The Scalestick needs to be replaced before the Hydroblend compound is completely used up.
You should also replace your water filters whenever you notice a decline in performance, whether it is a drop in flow rate and/or pressure, or an unusual taste in the water. You should also, per the CDC, replace your water filter after any boil water advisory alert is lifted in your area. Remember: taste and odor may tip you off to the presence of chlorine in your water, but most contaminants are tasteless and odorless.
For the benefit of our customers, we have set-up automatic electronic reminders that are sent when we see that their filters are due to be replaced, based on order history. We can even set-up Auto-Ship for customers that know they will need water filters by a certain date, but may not remember to place an order.
If you have a question regarding how often you should replace your filter or not sure about the filter system that you have please email your questions and a picture of the system to info@filterpure.com or call our team at 1-800-942-7873 and have a very Happy Valentine’s Day!
Ever had a bad espresso experience? Espresso is 85-96% water and that water is extremely important to delivering not only a great shot of espresso but not damaging a very expensive espresso machine. If the operator gets the water wrong this season you may find a ghostly taste in your coffee beverage. Chlorine can alter the aroma and increases acidity. It also bonds with organics creating an earthy or moldy overtone to the flavor. TDS, (total dissolved solids), can cause poor extraction of the grounds, under extraction leads to weak and sour drinks and over extraction leads to bitterness so taking care to treat coffee and espresso beverage water is extremely important. From Starbucks to Dunkin the 2015 seasonal holiday specialty beverage season ramps up this week with Halloween and with it some of the most popular coffee beverages ever inspired by a season. Who hasn’t had a Pumpkin Spiced Latte? This year’s current seasonal line up for Starbucks now includes the Toasted Graham Latte, the Salted Caramel Mocha and the Iced Vanilla Spiced Latte. Dunkin Doughnuts has their own Pumpkin Latte and Peet’s their Mayan Mocha! These hot seasonal espresso beverages have proven to increase sales and have succeeded for all of these chains and a lot of independent operators too by drawing in customers early and often during the holiday season. People don’t want to miss out on limited time seasonal offers and for a lot of us these drinks are now part of our memories of enjoying and celebrating the holiday season. 
Regardless of which one is your favorite, operators know and work diligently to make sure that all of these beverages begin with a great shot of espresso. Everpure continues to lead the Industry in taking care of the ghosts in the water, by working directly with Specialty Coffee Operators and Espresso Equipment Manufactures. From the ESO and Claris cartridge systems delivering filtered softened water through salt less ion exchange to the blended reverse osmosis line of MRS, Mineral Reduction Systems, we have a solution to turn the water operators are dealing with into the engineered water they need to deliver the espresso beverage that meets their specifications. For espresso, that means a softer water that also protects the equipment from both hard water scale and chloride, For example the, La Marzocco GB/5 Commercial Espresso Machine manual notes; 
For an operator the place to begin is with a POE, point of entry standard Everpure water test, DEV7013-73. This test includes the water bottle and lab analysis of 30 contaminants and characteristics. The test usually takes from 7 to 10 days to analyze at the laboratory located in Chicago and the following is a sample of the delivered analysis; 
This water would be way out of specification for the Marzocco with hardness of 257 ppm and chlorides of over 308.8ppm the recommendation would be an Everpure MRS Blended reverse osmosis system to actually take the mineral and chloride out of the water and deliver water with the correct specification of both hardness between 90ppm and 150ppm and chlorides of less than 50ppm. The size of the MRS unit is determined according to the amount of beverage water that will be needed at peak operating time within the facility. For example the MRS600HEII will make 600 gallons of water every 24 hours or 25 gph, (gallons per hour). The MRS350Bl will make 350 gallons every 24 hours or 14.58 gph, (gallons per hour). Not to worry though just call us and we will take care of sizing the equipment you need for your equipment. Everpure Espresso Solutions; 